|
Model
|
FPR-10M |
| Power Supply |
AC 220V 50Hz/AC 110V 60Hz |
| Speed of communication |
10Mbps |
| Standard |
IEEE802.3
/ HomePlug1.0 compliant |
| Protocol Supported |
TCP/IP |
| Modulation |
OFDM |
| Number of Carrier |
84
Carriers |
| Frequency Band |
4.3MHz-20.9MHz |
| Encryption |
56bit Encryption |
|
Interface |
POWER1 |
indicates power to device |
| POWER2 |
| WAN |
to
wideband modem or WAN |
| LAN1 |
used
with LAN2, or connect to WAN |
| LAN2 |
used
with LAN1, or connected to switch or hub |
| LAN |
LINK/ACT |
port
ready (solid); data traffic (flashing) |
| FULL/COL |
Duplex
mode (solid); collision occurs (flashing);
if it keeps flashing, there must be error
on network connection. |
| 10/100 |
100Mbps
speed if the light turns yellow |
|
WAN |
LINK |
connectivity to WAN ready |
| ACT |
Data traffic |
| DIAG |
auto diagnosing if on |
|
LEDs |
POWER
|
indicates power to device |
| LINK
|
indicates power line connection |
| COL
|
indicates collision on Ethernet |
| ACT
|
indicates
data traffic (flashing) |
|
Buttons |
RESET |
reset
to default settings |
| SW1、SW2 |
Cable
select: crossover cable (X); straight through
cable (II) |
Download